Widgets: 2x30mm pcd / diameter: 5x127 bore: 71.5mm eibach system enlargers 4. Disc with a screw system. With centering collar (centering nose).
Track changes from 30 to 60 mm (disc thickness from 20 to 30 mm). Fastening: by using special-fixing nut wheel by using production (or accessory) nut. Two pro-spacer with pressed-in knurled studs (= for one axle).
Installation instructions and information on cd. Article number: s90-4-30-007-I notes: s9 - when using the wheelspacers you have to check that the wheels are used to fit the original bolts. Without these cut-outs it is not possible to use the wheels or wheelspacers! Please check as follows: stud lengh e. 15mm = 10mm exess length. So the cut out should have 11mm depth to take the original stud. Further the cut out should have a minimum of 22mmx22mm height / width to take the overlap nut. It's allowed to shorten the peak with the maximum up to the beginning of the nut. We recommend only to shorten the minimum lengh. If shorten the stud bolts, first please consider that all wheels used at the car still will fit e. Summer- / winterwheels Warning: when using 15mm spacers at least 7mm deep cut-outs are needed as the nuts stand over the contact surface! It's allowed to shorten the stud bolts s23 - not permitted for vehicles with steel wheels! Grand Cherokee II (wj, wg). Grand Cherokee iii (wh, wk).Made from high-tensile-strength aluminum alloy. Exact fitment using maximum production tolerances, resulting in exceptional wheel balance. All applications tested in rigid durability- and fatigue tests.
High-grade corrosion protection through a special coating process (salt spray test according to DIN 50021). Significant weight advantage compared to wheel-spacers made from steel. The seller is \This item can be delivered anywhere in the world.