2x25mm track extenders for jeep control large cherokee iii wrangler iii eibach s90-4-25-013. Extenders: 2x25mm pcd / diameter: 5x127 aleage: 71.5mm eibach system extenders 4 eibach pro-spacer wheel spacers system 4 give the look and performance of your vehicle the finishing touch. Your vehicle gets a wider, more stable track - quickly and easily.
Eibach pro-spacer is the ideal combination for use with lowering springs, if the original or aftermarket wheels are missing that last optical "kick". With the eibach pro-spacer installed, the car looks wider and better, as the wheel fills the arch. That's how the car's look gets its final touch.By increasing the track width, not only the appearance is improved, but you also have an improved driving behavior combined with higher stability, as the roll of the chassis is influenced in a positive manner. Made of high-tensile-strong aluminum alloy.
Perfect fit due to the smallest manufacturing tolerances, resulting in balanced wheel balance. All applications tested in rigid durability- and fatigue tests. High-grade corrosion protection through a special coating process (salt spray test according to din 50021).
Meaning weight advantage compared to wheel-spacers made from steel. Disc with a screen system. With centering collar (centering nose). Track change from 30 to 60 mm (disc stickness from 20 to 30 mm).A disc at wheel carrier: by using special-fixing nut b wheel at disc: by using production (or accessory) -nut. With pressed-in knurled studs inkl. Short special wheel nuts, tüv-certificate as download Article number: s90-4-25-013 notes: s9 - attention - also notes on the standard wheels! - when using the spacers, make sure that the wheels used have appropriate slot pockets/removals to receive the original protruding wheel bolts, because without these sidings, it is not possible to install the rims or use the spacers. Pay particular attention to the protruding length of the original stud.
Example: length of stud 25 mm - width of disc 15 mm = projection of 10 mm of the original stud, so that the depth of the stud is at least 11 mm and the height/width of the stud is at least 22 mm to allow the stud nut to protrude. Cut the leading wheel bolts with a saw accordingly. Maximum to the beginning of the nut. We recommend to shorten only the required length. Please take into account the ease of use of all wheels used on the vehicle (e.Attention: for 15 mm discs, a draught of at least 7 mm is always required (discs 20mm minimum 2mm), as the nuts to be screwed exceed the contact surface of the disc! S23 - cannot be equipped with the use of steel wheels! Great Cherokee iii (wh wk). Made from high-tensile-strong aluminum alloy. Exact fitment by using minimum production tolerances, resulting in exceptional wheel balance. This item is in the category "auto, motorcycle - parts, accessories\ automobile: parts and accessories\wheels, tires and parts\interlocks, adapters and centering rings".
The seller is "tunershop_at" and is located in this country: de. This item can be shipped to the following country: whole world.