2x25mm Wheel Spacers for Jeep COMMANDER GRAND CHEROKEE III WRANGLER III Eibach S90-4-25-013. Spacers: 2x25mm PCD / Diameter: 5x127 Bore: 71.5mm Eibach Wheel Spacers System 4 The Eibach Pro-Spacer System 4 wheel spacers add the final touch to the appearance and performance of your vehicle. Your vehicle gets a wider and more stable track - quickly and easily.Wheel spacers are the perfect complement to lowering springs if the standard or aftermarket wheel doesn't have the desired visual "kick". With the matching Eibach Pro-Spacer wheel spacers, your vehicle gets an even sportier look as the wheels and tires truly fill out the wheel arches. The precise adjustment of the track width not only enhances the appearance of your vehicle, but also improves handling and reduces body roll.
Perfect fit thanks to the smallest manufacturing tolerances, resulting in balanced wheel balance. Fatigue resistance of all types tested according to the latest methods. High-quality corrosion protection through anodizing (salt spray test according to DIN 50021). High weight advantage compared to steel wheel spacers. Disc designed as a screw system.Track width change from 30 to 60 mm (disc thickness 15 to 30 mm). A Disc on wheel carrier: using a special fixing nut b Wheel on disc: using a standard nut (or aftermarket).
With pre-installed knurled bolts, including short special nuts (fixing nuts), TÜV certificate available for download Article number: S90-4-25-013 Notes: S9 - ATTENTION - ALSO NOTE ON FACTORY WHEELS! - When using spacers, make sure the used rims have appropriate pockets/cutouts to accommodate the original wheel bolts protruding, as without these cutouts, it is not possible to install the wheels or use the spacers. Pay special attention to the protrusion length of the original stud. Example: stud length 25 mm - disc width 15 mm = 10 mm protrusion of the original stud, so the cutout depth should be at least 11 mm and the cutout height/width should be at least 22 mm to allow the protruding stud nut. Cut protruding wheel bolts accordingly with a saw.
Maximum up to the beginning of the nut. We recommend shortening only the necessary length. Please consider the ease of use of all wheels used on the vehicle (e. ATTENTION: for 15 mm spacers, a recess of at least 7 mm is always necessary (20 mm spacers minimum 2 mm), as the screw nuts protrude from the contact surface of the disc! S23 - Cannot be used with steel wheels!
GRAND CHEROKEE III (WH WK).