- Index
- Brand
- Engine Code
- Model
- Product Group
- Air Conditioning (4)
- Axle (2)
- Body And Interior (7)
- Bodywork (11)
- Brake System (8)
- Braking System (2)
- Chassis (4)
- Conduit (2)
- Cooling System (2)
- Electrical (2)
- Engine Oil (3)
- Engine Part (15)
- Exhaust System (2)
- Exhaust, Fuel, Air (2)
- Interior Fittings (2)
- Piston (3)
- Signaling System (2)
- Steering (3)
- Suspension (9)
- Wheel Suspension (4)
- Other (3516)
- Product Type
- Air Filter, Filter (2)
- Brake Discs (8)
- Bumper (3)
- Catalytic Converter (2)
- Compatible Product (3)
- Control Unit (2)
- Fan (3)
- Filter (2)
- Grille (5)
- Headlights (4)
- Hood (3)
- Mudguard (2)
- Oil Change Set (11)
- Piston (3)
- Sedan, City Car (5)
- Shock Absorber (8)
- Shock Absorbers (3)
- Speedometer (2)
- Starter (3)
- Steering Wheel (5)
- Other (3526)
- Vin
Eibach Spacers 2x25mm for Jeep COMMANDER GRAND CHEROKEE III WRANGLER III S
Spacers: 2x25mm PCD / Diameter: 5x127 Bore: 71.5mm Eibach Wheel Spacers System 4 The Eibach Pro-Spacer System 4 wheel spacers give the final touch to the appearance and performance of your vehicle. Your vehicle gets a wider and more stable track - quickly and easily.
Wheel spacers are the perfect complement to lowering springs if the standard or aftermarket wheel doesn't have the desired visual effect. With the matching Eibach Pro-Spacer wheel spacers, your vehicle gets an even sportier look as the wheels and tires truly fill the wheel arches. The precise adjustment of the track width not only enhances the appearance of your vehicle, but also improves handling and reduces body roll.
Perfect fit due to the smallest manufacturing tolerances, resulting in balanced wheel alignment. Fatigue resistance of all types tested according to the latest methods. High-quality corrosion protection through anodizing (salt spray test according to DIN 50021).
High weight advantage compared to steel wheel spacers. ABE certificate or parts certificate. Disc designed as a bolt system. Track width change from 30 to 60 mm (disc thickness 15 to 30 mm). On disc to wheel carrier: using a special mounting nut.
On wheel to disc: using a standard nut (or aftermarket). With pre-installed knurled bolts, including short special nuts (mounting nuts). TÜV certificate available for download.Item number: S90-4-25-013 Notes: S9 - CAUTION - ALSO NOTE ON ORIGINAL WHEELS! - When using spacers, make sure that the wheels used have appropriate pockets/cutouts to accommodate the original protruding wheel bolts, as without these cutouts it is not possible to install the wheels or use the spacers. Pay particular attention to the protrusion length of the original stud. Example: stud length 25 mm - disc width 15 mm = 10 mm protrusion of the original stud, so the cutout depth should be at least 11 mm and the cutout height/width should be at least 22 mm to allow for the protruding stud nut.
Cut protruding wheel bolts accordingly with a saw. Maximum up to the start of the nut.
We recommend shortening only the necessary length. Please consider the ease of use of all wheels used on the vehicle (e. CAUTION: for 15 mm discs, a recess of at least 7 mm is always required (20 mm discs minimum 2 mm), as the screw nuts protrude from the contact surface of the disc!S23 - Cannot be used with steel wheels! GRAND CHEROKEE III (WH WK).