Roof bars for Jeep Grand Cherokee WK III SUV 2004-2010 with open rails

  
Basic, complete, aluminum roof bars. The roof bars fit most cars with standard longitudinal bars (open).

Why choose a Modula OvalBar roof bar? Thanks to the adjustable spacing of the mounting feet, the roof rack can fit most cars equipped with standard rails. The durable low-profile aluminum roof bars can support loads of up to 96.5 kg. Easy to install and use. No additional tools are needed.

The bottom seal protects the beam grooves from dirt and significantly reduces noise. The roof bar is secured on both sides with a key lock. Ideal base for: roof boxes, bike racks, ski mounts, and other car accessories. Maximum distance between supports (mm): 1215.

Minimum distance between supports (mm): 790. Maximum allowed load (kg): 96.5. You must check the load capacity of your vehicle's roof - it may be lower than the load capacity of the beams.

The kit contains all the elements necessary for installing a roof bar. Beam: 2 x aluminum beam. Foot: 4 x feet with key lock.

Other: 2 x lock keys, mounting instructions, mounting kit. Before purchasing, check the type of roof on your car. Standard roof beams (with space between the roof and the beam). The roof bars fit most cars with standard longitudinal bars (open).

The beam design makes them extremely easy to install and use, while maintaining a pleasing aesthetic appearance. A tightening key is included to adjust the supports, so no additional tools are needed. Afraid of complicated assembly or incomprehensible instructions?

Don't worry, the rack comes with a detailed and illustrated manual that includes all assembly parts and shows you the correct assembly process, step by step. The oval shape of the beam gives the trunk an aesthetic appearance and reduces air resistance to the steel beam, resulting in lower fuel consumption and reduced noise.

The oval aluminum bars allow for quick and easy installation and removal of most commercially available accessories using clamps. The profile dimensions are 41x24 mm.

The set does not include clamps. They are usually offered with accessories that can be mounted on the roof bars.

In order to protect the beams from moisture and significantly reduce the noise level resulting from air entering the beam profile, an additional groove seal is used in the lower part of the beam. The roof bars are equipped with a system that allows for quick and smooth adjustment of the bar mounting feet, making installation much faster and easier. Thanks to this solution, the same set can be used in most cars equipped with standard guardrails. The roof bars are characterized by a modern design, while maintaining the highest usability qualities.

It has also undergone rigorous certification tests for compliance with the TÜV-GS standard. To protect the roof bars from moisture and significantly reduce the noise level caused by air entering the profile, an additional seal has been added to seal the lower groove of the roof bars.

Each of the four feet of the roof bars is equipped with anti-theft locks to prevent unauthorized removal. The convenience of use is ensured by the possibility of operating the lock of each of the four feet of the rack with a single key. This is an Italian company that designs and manufactures roof boxes, roof bars, bike racks, car accessories, as well as solutions for the automotive and sports sectors. All products are approved by European transport authorities. The innovative design that distinguishes all products, the quality, the attention to detail, and the continuous research and development of new technologies and materials are just a few of the highlights of the Modula Case system.